LEC 3 Ethernet board DMX control
It is possible to use LEC3 also without the computer. You can play animations from
SD-card and switch between them using DMX. Here are DMX control channels:
1. Brightness – brightness of drawn image
2. Animation – choose animation from 0 to 255 (up to 256 animations).
3. Animation speed – default speed is 128.
4. Red (change color)
5. Green (change color)
6. Blue (change color)
7. White (change color) – used for RGBW strips
Red, Green, Blue and White are used to change color of the image (not to control color
channel intensity!). Just make sure, you use RGBW strips in
Software DMX control
It is also possible to control the LSS software using DMX. Please read software manual
for more details. But the DMX signal can be connected to DMX input of LEC3 device
(and it's being sent to LSS software over Ethernet).
17