Cobalt Digital Inc BBG-1000 Series Product Manual page 31

Setup/Operating Instructions
Table 3-1 BBG-1023-DSK-LG Function Menu List — continued
• Ident Position Select
• Ident Text Positioning Controls
Positioning with H and V controls at
zero (origin)
(Size = 3)
Positioning with H and V controls
both at 50
(Size = 3)
Origin (0,0)
y= 100%
BBG-1023-DSKLG-OM (V1.2)
BBG-1023-DSK-LG Function Menu List and Descriptions
(continued)
Sets the location of the ident text insertion from choices shown or custom.
(When Custom is selected, position is configured using the Ident Text
Positioning Controls described below.)
Example: Ident 1 text using
Top Left position
Example: Ident 1 text using
Center position
Note: For SD usage, burn-ins can impinge on and corrupt line 21
closed-captioning waveform if positioned too close to the upper
right of the raster.
With Custom selected, sets burn-in position attributes as follows:
• Horizontal Position sets horizontal position (in percentage of offset
from left of image area). (Range is 0 thru 100%)
• Vertical Position sets vertical position (in percentage of offset from top
of image area, top justified). (Range is 0 thru 100%)
Note: • Horizontal and Vertical Position controls are functional only when
Custom Position is selected.
• Character sizing and positioning for a given raster format may not
be appropriate for another format (especially if transitioning from
HD to SD). Set size and position for a balanced appearance (e.g.,
do not place text too close to margins or set larger than
necessary) that accommodates both HD and SD raster formats if
multiple format use is required.
x= 100%
BBG-1023-DSK-LG PRODUCT MANUAL
3-11