2
Note: BBG-1023 will not align with tray captive
fastener if rubber feet are affixed to
bottom of BBG-1023.
Remove rubber feet if BBG-1023 is
being installed in tray.
BBG-1023-DSK-LG Unit Dimensions
Rear Panel Connections
2-2
From front of tray, slide unit into tray, aligning with
1
tray edge and/or guides
2
Figure 2-1 Mounting BBG-1023-DSK-LG Using Frame Mounting Tray
Figure 2-2 shows the BBG-1023-DSK-LG physical dimensions and mounting
details for cases where BBG-1023-DSK-LG will be installed in a location not
using the optional
Perform rear panel cable connections as shown in Figure 2-3.
Note:
The BBG-1023-DSK-LG BNC inputs are internally 75-ohm terminated. It is
not necessary to terminate unused BNC video inputs or outputs.
BBG-1023-DSK-LG PRODUCT MANUAL
Slide unit (rear) fully to rear of tray. Secure unit to
tray using captive fastener. Tighten only finger tight.
BBG-1000-TRAY
Rear Panel Connections
mounting tray.
BBG-1023-DSKLG-OM (V1.2)