Advertisement
Quick Links
3
The Handle Grip has a slider ( 2 ). When the slider is open the suction power is
reduced. The reduced suction allows vacuuming of furniture or drapery, etc.
The Telescopic Wand has an adjustment Tab ( 3 ). This allows length adjustments -
shorter or longer. For example it can be shorten to vacuum stairs. For normal vac-
uuming lengthen to it maximum - it makes floor tool movement on carpet easier.
The Vacuum hose assembly is fitted to the elbow on the lid (lid should be fitted) by
Inserting and locating the swivel cuff (4) and turning clockwise to a locked position.
The lid can be fitted so that the elbow (where the hose engages) is on the left or
right side. This allows the vac hose to be used by left or right handed operators.
Remember to position the lid before fitting the unit to your back. To fit the lid,
make sure the filter bag is located inside the canister so that the black ring on the
filter bag is flush with the top of the canister. Then locate the lid over the filter bag
5
ring so that the tabs on the lid are in line with the indents on the canister. Push lid
firmly down so that tabs lock into position.
To remove the lid, place a finger under the tab in front of the unit. Pull tab out and
up slightly to disengage tab from the body and to clear the black ring on the filter
6
The unit comes with straps fastened for ease of packing. There are
three distinct types of support pads. 1. Contour shoulder pads; 2. Ad-
7
justable secondary shoulder pads; 3. Waist pads. Before fitting the
unit become familiar with various adjustments for safe and comfort-
able operation.
1. Shoulder strap adjustments (see Fig. 7)
a)To loosen tilt up strap lock and allow webbing to slide (A). To
tighten pull down on the bottom straps. (see Fig. 8)
B
b) Fitted to the shoulder pads are the adjustable secondary pads (B).
These pads add extra comfort and support. The secondary pads can
be moved along the shoulder pad to suit your comfort.
A
3070 / 3080
CONTENTS
Attachment of Vac Tools
1
Fitting of the Lid
Removal of the Lid
Fitting Unit to the Operators Back
4
2
(see Fig. 5)
(see Fig. 6)
8
Advertisement
Related Manuals for Tennant 3070
Summary of Contents for Tennant 3070
- Page 1 3070 / 3080 CONTENTS Attachment of Vac Tools The Handle Grip has a slider ( 2 ). When the slider is open the suction power is reduced. The reduced suction allows vacuuming of furniture or drapery, etc. The Telescopic Wand has an adjustment Tab ( 3 ). This allows length adjustments - shorter or longer.
- Page 2 2. Waist back pad adjustments (see Fig. 9) a) To unfasten hip belt pull Velcro flaps apart. b) To tighten waist belt pull both flaps until firm tension is felt from the supporting side elastic and make sure that the flap with the Velcro (right side) is against the body.
- Page 3 Filter Bag Maintenance and storage 1. Always empty the filter bag when full. 2. Make sure the bag support stand is in position at the bottom of the canister under the filter bag (see Fig. 16). N.B. This support stand must always be in position to maintain vacuuming performance.
- Page 4 DISPOSABLE PAPER FILTER BAGS Although your vacuum cleaner is designed to be used without paper bags, there are some advantages to using them. This open end bag design allows them to be re-used. If the paper bag is fitted with the ring supplied then it can be lifted and emptied and fitted back into place.