Huawei IPE Series Installation Manual page 69

IPE
Installation Guide
Figure 6-20 Disassembling the bracket and dome IPC
Step 2 Assemble the module that is equipped with the multi-connector cable, as well as the ceiling-
mounted bracket.
Route the multi-connector cable on the module through the straight pipe of the ceiling-
mounted bracket. Push the module into the ceiling-mounted bracket and rotate the module
clockwise for about five degrees until the module cannot be rotated any further.
Step 3 Use the three black screws that are removed in Step 2 to fix the module onto the ceiling-
mounted bracket, as shown in Figure 6-21. (Spare screws are available in the accessory kit of
the ceiling-mounted bracket.)
Figure 6-21 Fixing the module onto the bracket
Issue 03 (2013-02-28)
Upper cover
Bracket
-
Multi connector cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Module
6 Installing an Infrared Do me IPC
Inner liner
Lower cover
Three black screws
62