Roper RAL6245BL0 Use And Care Manual page 9

What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi-
ately after filling; agitation can occur with the
washer lid up or down.
After agitation starts, the Cycle Control Knob
turns clockwise until it points to OFF and the
cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
WASH RINSE
If9 4
Fill
Wash selected time
t4
-:
Drain (or partial drain*)
No agitation
l
The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
I3
4
Fill
Rinse
t4 -e-
Drain-No agitation
P-J P
.5%.
Spin-Spray rinse
Spin
LJ &
Spin
NOTE: Wash agitation speed is reduced
during the last few minutes of wash agitation in
the Heavy, Regular, and Permanent Press
cycles. This helps protect your fabrics.
UJ