Time Setting - Alnor HRU-CONTR-TPAD User Manual

Time Setting

Keep pressing the SET button for 6 seconds, after buzzing to enter the time setting interface. Under this
interface, press the MODE button shortly, then can switch from time setting, day setting, weekly timer
on and weekly timer off setting.
COMM
Time setting
COMM
Weekly timer on
1) Time setting: under time setting interface, press SET button for short, at this time "hour" flashes,
press UP and DOWN button to change "hour". After setting "hour", press MODE button for short to
switch to "minute" setting, at this time "minute" flashes, press Up and Down button to change "minute".
After time setting, press SET button to save and return to the main interface.
COMM
Hour setting
2) Day setting: under day setting interface, press SET button for short to begin the day setting, by
pressing UP and DOWN buttons to select the correct day, after this finished, press SET button to save
and return to the main interface
ALNOR Systemy Wentylacji Sp. z o.o. Knowledge Base | www.alnor.com.pl
COMM
Day setting
Touch screen controller
COMM
Week setting
COMM
Weekly timer off
COMM
Minute setting
7