Servus Pedale Sound Odyssey Manual

Advertisement

Quick Links

Servus!Pedale
Kaiserstraße 32-34
63065 Offenbach am Main
Germany

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sound Odyssey and is the answer not in the manual?

Questions and answers

Summary of Contents for Servus Pedale Sound Odyssey

  • Page 1 Servus!Pedale Kaiserstraße 32-34 63065 Offenbach am Main Germany...
  • Page 2 1-Reverb control 6-Effect input 2-Tone control 7-Effect output 3-Space control 8-Active preset 4-Expression pedal/CV 9-Effect bypass ON/OFF switch 10-Select/Save Preset 5-Exp.pedal/CV input 11-9VDC input 12-MIDI input...
  • Page 3 WELCOME Thank you for purchasing our A SOUND ODYSSEY. This guide will help you to discover all its functions. POWER SUPPLY The pedal can be powered via an external power supply (9VDC negative center pin). We recommend to only use power supplies regulated at 9VDC in order to avoid noises and pos- sible malfunctions of the pedal.
  • Page 4 BASIC CONTROLS -REVERB: This control adjust the amount of reverb. -TONE: Controls the tone of the wet signal. The dry signal stays always unaltered. -SPACE: It works like a feedback loop. It controls the amount of wet signal that returns to the effect input. FINE ADJUSTMENT: The pedal has a small trimmer inside.
  • Page 5 Connect an Expression pedal or CV generator to the EXP.PEDAL/CV input. ONLY use an Stereo TRS jack for this connection. SAVE AND RECALL PRESETS Select between the 6 available on board presets by pres- sing the PRESET footswitch. Once a preset is selected, all the parameters saved before are recalled.
  • Page 6 Space position. Now the Space section is activated and the Space led on. RELAY TRUE BYPASS The A Sound Odyssey uses a a Relay True Bypass system. This system uses a clickless switch, a PIC microcontroller and a high quality relay to do the bypass operation.
  • Page 7 5 DIN MIDI adapter is needed. You can buy this adapter on our shop. The A SOUND ODYSSEY is set by default to MIDI channel 3, but that can be easily changed. Just remove power, hold the pre- set switch and plug the power again. Now release the switch and the A Sound Odyssey will wait until a CC or PC MIDI message is received.

Table of Contents