Table of Contents
Advertisement
Approvals
Note for devices with CLASS 1 LASER
Important note on products certified according to Type Examination Certificate KEMA
07ATEX0145 X as of Issue 95 / DEKRA 18ATEX0025X and IECEx Certificate of Conformity
DEK 14.0025X as of Issue 43 / DEK 18.0017X and containing Class 1 optical radiation
sources.
Note
CLASS 1 LASER
The device contains optical radiation sources which comply with the limits of Class 1
according to IEC 60825-1. Fiber-optic cables connected to these optical radiation sources
may therefore be routed either to or through hazardous areas requiring Category 2G, 3G, 2D
or 3D equipment.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EU directive 2014/30/EU "Electromagnetic Compatibility" (EMC Directive).
Applied standards:
● EN 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity for industrial environments
● EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
You will find the current versions of the standards in the currently valid EC declaration of
conformity.
RoHS
The SIMATIC NET products described in these operating instructions meet the requirements
of the EC directive 2011/65/EC for the restriction of the use of certain hazardous substances
in electrical and electronic equipment:
Applied standard:
● EN 50581
FM
The product meets the requirements of the standards:
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
60
Extender for SCALANCE XM-400
Operating Instructions, 09/2018, C79000-G8976-C332-08
Advertisement
Table of Contents
