Dismantling; Disposal And Environmental Protection - Jaeger S80-M440.04 S5 Manual

30 ( 36 )

Dismantling

13 Dismantling
Proceed as follows to remove the HF spindle:
Ü Completely disconnect the power supply.
Ü Completely disconnect the media supply (air and liquid).
Ü
Make sure that the shaft of the HF spindle has come to an absolute stand-
still.
Ü Remove all connections from the HF spindle.
Ü
Empty the cooling duct of the HF spindle.
Ü
Remove the HF spindle from the machine.
13.1

Disposal and environmental protection

More than 90% of the materials used in the HF spindle can be recycled (alu-
minum, stainless steel, steel, copper, etc.)
The HF spindle may not be disposed of with normal domestic waste.
Ü Remove all non-recyclable materials.
Ü Dispose of the HF spindle as scrap at an approved recycling facility.
Ü Follow all rules of the responsible administrative bodies.
Ü Do not discharge coolants into wastewater.
Ü Dispose of cooling media in accordance with local regulations.
If the HF spindle cannot be dismantled, send the HF spindle to
GmbH. Alfred Jäger GmbH
and the fees for the recycling facilities.
shall not assume the costs incurred for shipment
Item no. 10504071, Revision 01
Alfred Jäger