Using Your Washer - Whirlpool LA980OXK Use & Care Manual

Using your Washer
Start your w,asher afrer vocl put In
detergent the ioad arid any other
laund~ 31ds according to lcformatlon
or: pages 3 and 14
1.
Set the LOAD SIZE SELECTOR.
l
Select the 'water level :?a+ matches
f'?e size of the load See page 6 for
more lnformctlor
l
To charIge the se+?lrng on the
LOAD
SIZE SELECTOR,
first mcJe It to RESET
Ther move tt back to the settirg you
want
2.
Move switch to POWER ON.
l
The REG HEAVY lndlcator Light w1l1
come on It shows that power IS or, and
reminds you ti;at your washer LQ~III start In
REG HEAVY c~qless /su +oI:?- 2 dffer
ent
FABRlC
Seiector
l
You have elcht seconds to touch a
selector (or to touch the HOLD Selects
for more ttme)
If you do not:
~ The washer will fill wltn warm water
to tne ,eve:
s~~)u~I-I orI
the
LOAD SIZE
SELECTOR.
~ The washer \?/III select REG HEAVY
(see page 8 for details]
3.
Touch a FABRIC Selector.
l
Touch selectors on tfie
lower half
REMINDER: You have eight sec-
onds to touch a FABRIC Selector
or HOLD. If you don't, the Solid
State Electronic Controls will
select REG/ HEAVY.
l
An indicator light ~~111 glow on the
FABRIC
Selector you touched.
l
If you want more than eight sec-
onds to make a selection:
~ Touch HOLD Then take as much
time as you want.
~ Toilcn a Selector or Selectors.
~ Touch RUN to cancel HOLD
4.
Touch OPTION SELECTORS.
l
If you did not touch a FABRIC
Selector,
you have eight seconds after
the power IS turned on to touch option
selectors. The washer WIII select PEG
HEAVY and add the options you
selected.
The Electronic Controls are pre-set for
a warm wash and cold rinse in every
FABRIC
Selection Change water
temperatures by touching Option
l
If you did touch a FABRIC Selector,
you have eight seconds to touch the
option selectors you want. Every time
you touch one, you hove eight seconds
to touch another
UNLESS YOU TOUCH
RUN OR SPIN ONLY. RUN
immediately
starts the cycle SPIN ONLY cancels
all selections and starts draining and
spinning right away (See page 13 )
l
SOAK CYCLE will cancel any FAB-
RIC Selection touched before it.
l
SUPER WASH can be added to any
FABRIC
Selection. Touch It before the
FABRIC
Select/on.
l
Touching RINSE SPIN before the
washer starts WIII cancel all selections
exceDt COLD WASH