Whirlpool LA980OXK Use & Care Manual page 5

5.
Indicator Lights.
l
The !rght on each selector VGU tcuch
wrli glow to show that your selectro? ;s
recorded Thev w1'1 glow> until the lcod IS
finished
l
Four lndrcator Lights below the selec-
tors (SOAK SUPER WASH, WASH, RINSE
2nd RINSE and FINAL SPIN) go on and
off
tG
let you know what the washer IS
doing
l
T'?e light on the HOLD Selector glows
when you have stopped the washer
by touching HOLD
l
The light on the RUN Selector goes off
only when the washer is OFF, on HOLD,
or during the eight second selectron
period
6.
Changing a selection.
l
Before the washer starts, touch an-
other selector That cuncels the one you
don't want See page 7 for detarls
l
After the washer starts, -io\/e the
swtch to POWER OFF
-- Start back at Step 1
~ Or, if you ,b$ant to drain on\ water
before makrng new selections
1 Move switch to POWER ON
2 Touch SPIN ONLY
3 Start at Step 1 when spanning
stops
7. HOLD and RUN Selectors.
l
Touch HOLD rf you want to stop the
washer for any reason, but want to start
It agarn where it left off.
l
Touch HOLD if you want more than
eight seconds to make selectrons
l
Touch RUN to cancel HOLD
l
Touch RLJN to immediately start the
cycle
POWER FAILURE. If the electricity
goes off or a fuse blows while the
washer is running, all selections
are canceled. See instructions on
page 7.
-I