Samsung GT-I9295 Service Manual page 43

Level 2 Repair
7-1-1. Assembly
1
Set a PBA and FRONT Ass'y.
3
Assemble Rear and Screw.
Press this point
1) Drive Screws at 12 points with torque
1.5 ± 0.1 Kgf/ ㎠
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
2
Assemble PBA and FPCB
①VT CAM ②Sensor
⑥SUB PBA
1) Assemble PBA on Front Ass'y
2) Assemble FPCB 6point
4
Assemble Screw cap
1) Assemble Screw cap 4point.
7-2
③SVC LED
④ LCD
⑤COAX