Samsung GT-I9295 Service Manual page 42

7. Level 2 Repair
7-1. Disassembly and Assembly Instructions
7-1-1. Disassembly
1
Disassemble SCREW CAP
1) Be careful not to make scratch and molding damage!
2) Detach Screw cap 4point using tweezers.
3
Disjoint Hook at REAR // Disassemble REAR
1) Disassemble Rear in oder.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Tweezer insert point
1) Be careful not to make scratch and molding damage!
2) Release Screw 12 point
1) Be careful not to scratch FPCB
2) Hold up Main PBA from bottom.
7-1
2
Release Screw 12 Point at REAR
4
Disassemble FPCB and PBA