Stopping/Restarting Your Dryer; Selecting A Cycle And Setting - Crosley 3406874 Use And Care Manual

Large capacity automatic combo washer/dryer
Table of Contents

Advertisement

OPER A T IN G YO UR D R Y E R

Stopping/restarting your dryer

You can stop your dryer anytime during
a cycle.
To stop the dryer, either:
Open the dryer door

Selecting a cycle and setting

Your dryer's Cycle Control Knob is shown
above. Use the drying guidelines and cycle
descriptions on this and the following pages
for help in selecting the right drying cycles.
Always follow care label directions when
they are available.
To dry delicate fabrics, rubber, plastic,
and heat-sensitive fabrics, always use the
No Heat/Fluff cycle or dry these items on
a line or rack.
The last few minutes of all cycles are with-
out heat to make the load easier to handle.
To help reduce wrinkling, remove the load
from the dryer as soon as tumbling stops.
This is especially important for permanent
press, knits, and synthetic fabrics.
16
OR
Turn the Cycle Control Knob to Off.
NOTE:
Off
Knob should point to an Off
area when the dryer is not
in use.
Off
To restart the dryer:
1.
Close the dryer door.
2.
Select a new cycle, if desired.
3.
Push the Start button.
Overdrying can cause shrinkage, static
cling, and damage to some fabrics.
See the "Laundry Tips" section for informa-
tion about:
– sorting clothes for drying
– choosing load sizes
– using dryer fabric softeners
– drying special-care items
The Cycle Control

Advertisement

Table of Contents
loading

Table of Contents