Table of Contents
Advertisement
OPER A T IN G YO UR W A S HE R
Adding liquid chlorine bleach
Always measure liquid chlorine bleach. Do
not guess. Never use more than 1 cup
(250 mL) for a full load. Use less with
lower load size settings. Follow manufac-
turer's directions for safe use. Use a cup
with a pouring spout to avoid spilling.
1.
Let the washer fill and begin agitating
the load.
2.
Add bleach to wash cycle so it can be
removed in the rinse cycle. Pour bleach
around agitator, not directly on load.
•
Follow directions on care labels. Do
not use chlorine bleach on wool, silk,
spandex, acetates, or some flame-
retardant fabrics.
Adding liquid fabric softener
NOTE:
Your washer does not come with a
fabric softener dispenser installed.
To order the fabric softener dispenser
(Part# 3350834), contact the store where
you purchased your washer/dryer.
•
Always dilute liquid fabric softener with
1
⁄
to 1 cup (125 to 250 mL) warm water.
2
Undiluted fabric softener can stain fabrics.
•
Add diluted fabric softener only in the
final rinse.
•
Fabric softener should not be mixed with
other laundry products because greasy
stains may form. If stains form, remove
by wetting the stain and rubbing with liquid
detergent or a bar of soap. Rewash the
stained item.
•
Too much fabric softener can make some
items (diapers and towels) nonabsorbent.
If this happens, use less fabric softener or
do not use it every time.
14
•
When soaking with chlorine bleach, add
detergent to soak water.
NOTE:
Undiluted bleach will damage any
fabric it touches. The damage appears as
rips, holes, tears, or color loss and may not
show up until several washings later.
Advertisement
Table of Contents
