Table of Contents
Advertisement
OPER A T IN G YO UR W A S HE R
4.
Select a wash-rinse temperature with
the Temperature selector. Match the
water temperature with the type of
fabric and soils being washed. See
"Water guidelines" in the "Laundry Tips"
section.
•
Three wash-rinse temperatures are
available: Cold-Cold, Warm-Cold, and
Hot-Cold.
5.
Push in and turn the Cycle Control
Knob clockwise. Stop when the indica-
tor on the outer ring points to the
number in the wash cycle you want.
•
The numbers are minutes of wash time.
•
The cycles are described in "Selecting
a cycle and time."
6.
Pull out Cycle Control Knob to start
washer.
7.
(OPTIONAL STEP) If desired, add
liquid chlorine bleach AFTER washer
starts agitating. See "Adding liquid
chlorine bleach."
8.
(OPTIONAL STEP) If desired, add
measured and diluted fabric softener
to the final rinse cycle. See "Adding
liquid fabric softener."
Stopping/restarting your washer
If necessary, you can stop your washer
during a cycle to add more clothes.
•
To stop the washer at any time, push in
the Cycle Control Knob.
•
To restart the washer, close the lid (if
open) and pull out the Cycle Control Knob.
10
Advertisement
Table of Contents
