Qualitrol 118 ITM Series Instruction Manual page 33

Appendix F Windows 7 Install
–
6. Now click on the launch icon
prompt the user with a Run-Time error, as seen in figure 19, this is expected, click OK.
7. While placing the pointer over the 118ITM shortcut
administrator", refer to figure 20 for illustration.
*If this option is not available please contact your I.T department for assistance.
8. After you select "Run as administration", it will then launch the 118ITM configuration software.
Once this step is completed the user will not have to run through this process again.
Now the user should be able to just click on the shortcut
configuration software. For configuration instructions please refer to section "4.3 Configuration".
Courtesy of NationalSwitchgear.com
. By launching the software application Windows, it will
Figure 19 Windows 7 Error
Figure 20 Run as Administration
29
, right click and select "Run as
, which will launch the
www.qualitrolcorp.com