Advertisement
RAPIX Lighting Control System
1. Product Item
This guide provides user operation and product specification information for the RAPIX Light Level Sensor, item
number DGOZ-LLS-M.
2. Product package contents
The Light Level Sensor package includes the following.
• 1 x Light Level Sensor
• 1 x Light Level Sensor patch lead
• 1 x eHub patch lead
• 3 x PIR Occupancy Sensor patch leads
3. Important notes and safety information
The Light Level Sensor is only suitable for use with the RAPIX eHub (item Number DGOZ-EHUB-4G-2S)
•
The Light Level Sensor does not have a mains supply connection
•
The Light Level Sensor is powered via a RAPIX eHub (12Vdc)
•
There are no user serviceable parts inside the Light Level Sensor. Do not attempt to disassemble or
•
operate the device with any covers removed
The Light Level Sensor is intended for indoor use only.
•
If you require information or assistance regarding the installation, configuration, or operation of the Light Level
Sensor, contact Technical Services at Diginet Control Systems. Contact details are provided on the back cover of
this guide and also at
www.diginet.net.au
4. Product summary and capabilities
The Light Level Sensor (DGOZ-LLS-M) can be used as part of a RAPIX Lighting Control System to control a space
based on ambient light measurement.
The RAPIX Light Level Sensor connects directly to an eHub and is used to measure light levels in a space and send
this information to the eHub for logic processing. The required operation of the Light Level Sensor/eHub is
configured in the RAPIX Integrator software package.
Up to three RAPIX PIR occupancy sensors can optionally be directly connected to the Light Level Sensor.
5. Product Features
Connects to and powered from a RAPIX eHub.
•
0 to 4000 Lux sensing range.
•
Allows connection to three PIR sensors.
•
Fits standard Australian wall plate aperture.
•
Suitable for ceiling and wall mount.
•
RAPIX Light Level Sensor
2
Advertisement
