Light level sensor with three inputs for pir sensors (8 pages)
Summary of Contents for Diginet DGOZ-OS-PIR-360
Page 1
JOSEPH JOUKHADAR Managing Director services@automated.net.au +61 2 9247 0731 Suite 4, Level 5 37 Pitt Street Sydney NSW 2000 Installation Guide DGOZ-OS-PIR-360 PIR Occupancy Sensor Designed in Australia to meet Australian Standards and installation conditions DIGINET.NET.AU...
The PIR Occupancy Sensor is intended for indoor use only. If you require information or assistance regarding the installation, configuration, or operation of the PIR Occupancy Sensor, contact Technical Services at Diginet Control Systems. Contact details are provided on the back cover of this guide and also at www.diginet.net.au...
Page 3
RAPIX Lighting Control System RAPIX PIR Occupancy Sensor 6. Mounting the PIR Occupancy Sensor The sensor head is designed to be installed in plasterboard ceiling or ceiling tiles with a thickness of 10mm - 16mm thickness. A 52mm diameter cut-out is required to recess mount the sensor head. The diagram below shows a cross section through the sensor head.
Open plan offices, reception areas † In Walk Test Mode the output will activate for 5 seconds only Note: The eHub can also set timing for the sensor, see the application note on the Diginet Web Site. Settings for adjustable light level threshold Position...
RAPIX Lighting Control System RAPIX PIR Occupancy Sensor 9. Presence/Occupancy Detection The sensor head has two distinct detection sensitivity zone categories, major movement and minor movement. (Occupancy) is defined as a 60kg person, walking at >1m/s, across the field of view, with a Major Movement background ambient temperature of 20°C.
RAPIX Lighting Control System RAPIX PIR Occupancy Sensor 11. Product dimensions 12. Standards and compliance The product is designed to meet/exceed the following Australian and International standards: Australian/New Zealand EMC and Electrical Safety Frameworks and Standards Regulation Standard Title AS/NZS CISPR 22:2009 Information Technology Equipment –...
7.1.3. fax to 1300 95 3257; or 7.1.4. email to sales@diginet.net.au. 7.2. return the Goods at the Owners expense to the return address notified by Gerard Lighting together with all accessories, instructions, specifications or other material supplied with the Goods and a notice in writing: 7.2.1.
Page 8
96-112 Gow Street Padstow NSW 2211 Contact General Enquiries: 1300 95 DALI (3254) or sales@diginet.net.au Technical Services: 1300 95 3244 or support@diginet.net.au Fax: 1300 95 3257 Diginet is a brand of the Gerard Lighting Group Version: Issue 1 January 2016 Item 14-12-008-003-01...
Page 9
96-112 Gow Street Padstow NSW 2211 Contact General Enquiries: 1300 95 DALI (3254) or sales@diginet.net.au Technical Services: 1300 95 3244 or support@diginet.net.au Fax: 1300 95 3257 Diginet is a brand of the Gerard Lighting Group Version: Issue 1 January 2016 Item 14-12-008-003-01...