Related Manuals for Diginet RAPIX DGOZ-LLS-M
Summary of Contents for Diginet RAPIX DGOZ-LLS-M
- Page 1 Installation Guide DGOZ-LLS-M Light Level Sensor with three inputs for PIR Sensors Designed in Australia to meet Australian Standards and installation conditions DIGINET.NET.AU...
-
Page 2: Product Package Contents
• If you require information or assistance regarding the installation, configuration, or operation of the Light Level Sensor, contact Technical Services at Diginet Control Systems. Contact details are provided on the back cover of this guide and also at www.diginet.net.au 4. - Page 3 RAPIX Lighting Control System RAPIX Light Level Sensor 6. Possible operational setups: • ‘Daylight harvesting’, where DALI luminaires connected to a RAPIX Lighting Control System are dimmed up or down to maintain a required illuminance (Lux) level on a desktop. •...
- Page 4 RAPIX Lighting Control System RAPIX Light Level Sensor 8. Connecting the Light Level Sensor to a RAPIX eHub The Light Level Sensor is only suitable for use with the RAPIX eHub. The Light Level Sensor can be connected and powered from any of the four eHub smart channel inputs. Patch leads are provided to connect the Light Level Sensor to the eHub as shown below.
-
Page 5: Specifications
RAPIX Lighting Control System RAPIX Light Level Sensor 10. Configuration The RAPIX Light Level Sensor is configured using ‘RAPIX Integrator’ PC software. 11. Specifications Input Voltage 12Vdc (supplied via RAPIX eHub) Input current 10 mA with no PIRS. Up to 160 mA fully populated with PIR’s. Each PIR should have a current draw <... - Page 6 RAPIX Lighting Control System RAPIX Light Level Sensor 13. Standards and compliance The product is designed to meet/exceed the following Australian and International standards: Australian/New Zealand EMC and Electrical Safety Frameworks and Standards Regulation Standard Title AS/NZS CISPR 22:2009 Information Technology Equipment – Radio Disturbance Characteristics –...
- Page 7 7.1.3. fax to 1300 95 3257; or 7.1.4. email to sales@diginet.net.au. 7.2. return the Goods at the Owners expense to the return address notified by Gerard Lighting together with all accessories, instructions, specifications or other material supplied with the Goods and a notice in writing: 7.2.1.
- Page 8 96-112 Gow Street Padstow NSW 2211 Contact General Enquiries: 1300 95 DALI (3254) or sales@diginet.net.au Technical Services: 1300 95 3244 or support@diginet.net.au Fax: 1300 95 3257 Diginet is a brand of the Gerard Lighting Group Version: Issue 1 August 2016 Item 14-15-007-001-01...