Other Features - Whirlpool TAWM400A Use & Care Manual

Other Features
I
In This Section
Pa*
Paw
Using the chlorine bleach di$pensw . . . . . . . . . . . . . . 10
Manual clean lint filtw
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
I
Your washer has the following features. Understanding the use of the features on your machine
will help you efficiently use your washer.
Using the chlorine bleach dispenser
Always measure chlorine bleach. Do not guess.
For this washer, never use more than l/i cup
(125 mL) for a full load. Use less with lower
water level settings. Follow manufacturer's
directions for safe use. Use a cup with a pouring
spout to avoid spilling.
1. Load the washer.
2. Pour measured chlorine bleach carefully into
dispenser. Do not let bleach splash, drip or
run down into washer basket. Undiluted
bleach will damage any fabric it touches.
3. Start the washer. Bleach will be diluted
automatically during the wash part of the
cycle.
NOTE: Do not add all-fabric bleach to the
dispenser. The dispenser can clog.
Manual clean lint filter
Clean lint filter after every load.
1. To remove, grasp the top of the agitator
with both hands. Pull upward to remove
agitator cap. Lint filter is attached to the end
of the shaft.
2. Detach lint filter by pinching forked ends of
shaft together. Slide lint filter off shaft.
3. Wash or wipe the lint filter clean.
4. Slide filter back into place on shaft (open
end up). Snap into place.
5. Push lint filter and agitator cap firmly back
into agitator.
Lint filter /
10