Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Indexator Manuals
  4. Industrial Equipment
  5. LINKSYS MPB1-80/45 KPL
  6. User manual

Indexator LINKSYS MPB1-80/45 KPL User Manual

Dual swingdamper
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
LINKSET
Dual Swingdamper MPB1-80/45 KPL
Dual Swingdamper MPB1-100/45 KPL
Dual Swingdamper MPB2-100/45 KPL
Dual Swingdamper MPB2-100/45C KPL
Dual Swingdamper MPB2-CRH KPL
Dual Swingdamper MPB2-CRH C KPL
w
w w.indexat or.com
User manual
User
User
5002806 en
|
|
1048 826
3447
2015-02-10

Advertisement

loading

Related Manuals for Indexator LINKSYS MPB1-80/45 KPL

Summary of Contents for Indexator LINKSYS MPB1-80/45 KPL

  • Page 1 User manual User User LINKSET Dual Swingdamper MPB1-80/45 KPL Dual Swingdamper MPB1-100/45 KPL Dual Swingdamper MPB2-100/45 KPL Dual Swingdamper MPB2-100/45C KPL Dual Swingdamper MPB2-CRH KPL Dual Swingdamper MPB2-CRH C KPL 5002806 en w w.indexat or.com 1048 826 3447 2015-02-10...

  • Page 2: Safety Instructions

    This product is designed for the supen- sion of a freely hanging load. Adapted for use in combination with Indexator’s H-rotators. The products brake unit is designed to reduce the oscillating action. The disc should be kept free of grease and oil to ensure the best braking effect.

  • Page 3: Safety Sticker

    3. Safety sticker The sticker should be positioned so that it is easily visible to the driver without hindering the view. The sticker is self-adhesive. The surface to which the sticker is attached must be thoroughly cleaned. 4. Assembly instructions for the lower brake For rotator and swing damper 4.1.1 Check that the bushings are correctly...
  • Page 4 4.3.3 The sleeves G, have to be greesed both in- and outside, and the tube H greesed ourside with copper paste or similar. 4.3.4 Assemble sleeves G from each direction and then feed into the centre pipe H to the centre. 4.3.5 Assemble the adjustment screws F.
  • Page 5 Secure the bolted joint with the locking nut after adjusting. 5.3.2 The pin in the crane nose is assembled in accordance with the crane manufacturer’s recommendations. Indexator recommends: Surface fineness Ra < 1,25 µm (50 µin) Surface hardness > 50 HRC...

  • Page 6: Technical Data

    6. Maintenance instructions Lubricate the link’s bearings every 50 hours. In order to achieve the best operating purpose possible the sleeves G should be greesed both in- and outside, and the tube H greesed outside with copper paste or similar every 1000 working hours.
  • Page 8 Indexator Rotator Systems Tel + 46 933 148 00 rotator@indexator.com www.indexator.com...

This manual is also suitable for:

Linksys mpb1-100/45 kplLinksys mpb2-100/45 kplLinksys mpb2-100/45c kplLinksys mpb2-crh kplLinksys mpb2-crh c kpl