Fig . 2.2: Jumpers Setting - Caen N625 Technical Information Manual

Document type: Title:
User's Manual (MUT) Mod. N625 Quad Linear Fan In/Fan Out
THRESHOLD TRIMMER:
DISPLAYS:
INTERNAL JUMPERS:
GAIN SELECTION
GAIN SELECTION
GAIN SELECTION
GAIN SELECTION
NPO:
00111/02:N625x.MUTx/03
PRINTED BOARD
TRG SLOPE SEL
Fig. 2.2: Jumpers setting
Filename:
N625_REV3.DOC
Revision date:
01/06/2004
Mechanical specifications:
Front panel screwdriver trimmer
Function:
Allows to adjust the discriminator threshold in
the -1200÷+1200 mV range; one test–point
allows to monitor the threshold value
Trigger slope LEDs: 2 Front panel LEDs; the
relevant LED lights up according to the trigger
slope setting: green: Trailing edge; yellow:
Leading edge
Trigger slope jumper: allows to set the trigger
slope either to leading or to trailing edge
Width range jumper: allows to select the
output width range between 5÷70 ns and
15÷600 ns (refer to Fig. 2.2)
WDT RANGE
J8
Number of pages:
10
Revision:
3
FAN IN/FAN OUT
GAIN
-1x +1x
DISCRIMINATOR
TRIGGER SLOPE
LEADING TRAILING
WIDTH RANGE
15÷600 ns
5÷70 ns
Page:
9