Bosch HCP56652UC Installation Manual page 6

Connect your extractor hood to
Step 2.2:
your WLAN home network (Wi-Fi) step by
step
Please enter step 2.2 only when prompted to by the app.
The following steps describe operations at the home
appliance itself.
Note:
To connect the hood to your home network, the
hood and the light must be off. You can cancel the
process at any time by pressing "0".
1 | Press and hold the "CONNECT" button until "on/off" and
"CONNECT" flash.
1
Press "2".
2 |
D D
"2" and "CONNECT" will flash.
2
EN
6
3 | Follow the instructions in the app.
D D
The appliance will open a temporary Wi-Fi network
called "HomeConnect" for 2 minutes with the password
"HomeConnect".
The app provides your home Wi-Fi network name
(SSID) and its password via this temporary Wi-Fi
network to the hood enabling the hood to connect
to your home Wi-Fi network.
D D
When "CONNECT" and "3" flashes your hood is connected
to the home network.
4 | Follow the instructions in the app.
Information:
For some appliances the step-by-step mode is also
called "SAP mode" or "manual mode".
If the step-by-step mode does not work please
check:
- Your appliance is in the range of the WLAN home
network (Wi-Fi).
- Your smartphone/tablet is connected to your
WLAN home network (Wi-Fi).
- Your smartphone/tablet and appliance are
connected to the same WLAN home network
(Wi-Fi).