Labelling And Packaging; Delivery Set; Preparation For Work And Operation With The Device - IGM MULTIGASSENS-M2 User Manual

MULTIGASSENS-М2 USER MANUAL

1.5 Labelling and packaging

1.5.1 Labelling
Marking of the device is made on the nameplate located on the rear panel of the case (Image.1 -
position 8). The plate contains the data specified in table 6.
№ on the
image
Manufacturer's name
1
2 Name of the device
3 Special sign of explosion safety
Inscription"ГОСТ Р 52350.29.1-2010"
4
Explosion protection marking Р0 Ex ia I /0 Ex ia IIС T4
5
6 The sign of type approval of measuring instruments
7 Ambient temperature range
8 Dust and moisture protection IP68
After receiving the certificate – a single sign of circulation in the market of the member
9
States of the Customs Union
1.5.2 Packaging
The device is Packed in a box of corrugated cardboard or foam polystyrene. The accompanying
documents for the delivery set are also placed in the box.

1.6 Delivery set

The delivery set of the device is presented in table 7.
Portable gas analyser МULTIGASSENS-М2
Packaging
Calibration nozzle
Calibration procedure
User Manual
Certificate of conformity
Name

2. Preparation for work and operation with the device

Explanation
Rev. 1.8 07.02.19
Таble 6
Таble 7
Number
1 unit.
1 unit.
1 unit.
1 copy
1
1
copy
14