Overview Connection overview Right Left GND Optional RF remote receiver module (part#: RX433N) Line or phones output Direct stereo speaker connection (see connection diagram on pag. 4) Mono or Stereo output selection On board power amplifier Adaptor input 12Vdc regulated min. 1A 7 on-board preset buttons Connect up to 7 external preset buttons (same action like on-board ones) On-board infrared receiver...
Loudspeaker connections diagram Rechts Links GND Hint: If multiple speakers are used you can connect speakers in series + parallel Led indications : play ON: Flat sound Blinking : pause mode : sleep mode ON: random mode is activated Pagina 4 van 12 (rev.1)
Overview push button control Preset buttons : Play or learn a folder/music * “On-board” Bedieningsknoppen RF Remote learn button These preset buttons will be assigned to folders A to E by default if these folders are present onto the SD card. Connect up to 7 external preset buttons, these will have the same action like on-board ones.
(see the chapter “Connection overview”). 1- Download the VM8095 Programmer software from the product page on our website: www.velleman.eu 2- Power up the VM8095. 3- Connect the VM8095 to the PC using the included USB cable (check for the correct USB hardware installation).
Learning a remote Learning a RF remote (VM118R / K8058 / VM160DT / VM160T) Learning a RF remote is only possible when the RF-receiver is mounted. (art. RX433N). Antenna 20cm Data Data “SW15” Learn RF remote Keep push button SW15 pressed while transmitting with the remote.
Keyboard Layout for optional remotes RF-remote: VM160T RF-remotes: K8058 / VM118R IR-remote : K8049 RF-remote: VM160DT Play / Pause Volume Up Volume down Random Power off Next Previous 4-channel IR remote: VM191 Browse presets Pagina 8 van 12 (rev.1)
Sound & play modes The MP3 player features several possible play modes and preset sound modes. The “play mode” is only available when a LCD-display is mounted! Sound modes: Live - Hall - Flat - Loudness - Heavy - Clear - Soft and Disco 2.
Selected folder: Select mode press long SW6 “select” to open the setup menu. Press short “SW6” for the play mode. choose the mode “play folder” with push buttons SW4 (up) / SW5 (down) Confirm with a short press on SW6 ...
Preset push buttons “A” – “B” – “C” – “D” – “E” All preset push buttons will automatically be linked to a folder on the SD-card. To do this it’s necessary that the folders on the SD-card have the folder name: A, B, C, D and E, each folder have it’s own music files.