Advertisement
Available languages
Available languages
SHORT USER MANUAL COMMAND UNIT
3. CONTROL ELEMENTS
3.2 Command Unit (front face) (rear face)
The Command Unit controls either the functions of the external unit via a hard-wired control panel, via the app or via the
Oyster® TV.
Control panel
1. USB
2. Power button
3. „Star" button
4. „i" button
Antenna
Control1
Inputs/outputs
1. antenna control
2. Powersuply
3. Fuse
4. Ant
5. TV set
6. Mode
7. CI-Bus
8. CTRL
9. WiFi
USB port (for updates via USB stick)
This button switches the entire antenna system on and off. If you press
this button while the antenna is in motion, it will stop immediately
(emergency stop).
When the antenna is open and stopped, pressing this key will cause the
system to retract (park) and shut down (standby).
reserved
This button has various functions that are indicated by the colour of the LED.
SAT
Ant.
10 A
31 30 15
Battery
4-pin plug contracable external unit
Ignition/ terminal 15/ D+ and 12V/ 24V powersupply
10 A (FKS-Mini, red)
SAT IN from external unit (Antenna)
SAT OUT to Receiver/ TV
Rotary switch for SAT mode (default setting 0 = automatic mode)
Optional control input
Control panel (if included in supply)
WiFi antenna
TV
CI
Bus
Advertisement
