Software Updates; Troubleshooting - Honeywell Home Smart Thermostat 9000 color touchscreen User Manual

Software updates

Resideo periodically issues updates to
the software for this thermostat. The
updates occur automatically through
your Wi-Fi connection. All your settings
are saved, so you will not need to make
any changes after the update occurs.
Updates occur in the early morning. After
your thermostat receives the software,
it reboots, briefly displaying the Resideo
logo. The screen then shows "Updating
software..." with a green progress bar.
When the update is complete, your home
screen will appear as usual.
Note: If you are not connected to Wi-Fi
or registered at Total Connect Comfort,
you will not get automatic updates.

Troubleshooting

If you have difficulty with your thermostat, please try the following suggestions.
Most problems can be corrected quickly and easily.
Display is
blank
"Wait" appears
on the screen
Heating or
cooling system
does not
respond
69-2814EFS—07
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating and cooling system is on.
• Make sure furnace door is closed securely.
• Compressor protection feature is engaged. Wait 5 minutes for the
system to restart safely, without damage to the compressor.
SYSTEM
• Touch to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
SYSTEM
• Touch to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating and cooling system is on.
• Make sure furnace door is closed securely.
• If "Wait" is displayed, the compressor protection timer is on. Wait
5 minutes for the system to restart safely, without damaging the
compressor (see page 16).
25