Table of Contents
Advertisement
Cleaning and Maintenance
Replacing the Oven Door
Return the door to its original position after
cleaning is completed.
• Align the bottom of the door along the bottom
of the oven and push the door hinge into the
hinge slots. Slide the door in until the slots on
the hinges engage the Oven housing.
• Make sure the Oven door is able to open until
maximum angle (approximately 90 °).
• Push back the buckle at the door hinge forward.
(Figure 3)
• Gently open and close the door several times
to make sure it is correctly installed to avoid
any damage.
Removing the Rack from Oven
Removing the rack will make it easier to clean the
side wall of the oven.
• To remove the rack, unscrew 1 piece of screw at the
bottom side of wall using a '+' screwdriver. (Figure 4)
• Then, lift up the rack to an angle approximately 90 °,
and slowly pull the rack out from the oven. (Figure 5)
• When cleaning is completed, reverse the above
procedures to return the rack to its original position.
18
Figure 3
Figure 4
90
Figure 5
Hide quick links:
Advertisement
Table of Contents
