Table of Contents
Advertisement
Other operating instructions
For a rinse and spin
For a drain and spin
You may need an extra rinse and
Your washer can be set to drain and
spin for heavily
soiled loads which
spin out water.
need more detergent.
(Extra detergent
1. Push Control
Knob in.
can require
an extra rinse.]
1. Push Control
Knob in.
2. Turn clockwise
to any o on the dial.
See above
drawing.
3. Pull Control
Knob out The washer
will fill to selected
level; agitate
2
minutes; drain and spin.
2. Turn clockwise
to the bar just before
the OFF area in any cycle.
See
above
drawing.
3. Pull Control Knob out. The washer
will drain and spin.
Cleaning the lint filter
Clean
filter after every load for
best filtering
results. NOTE: The load
type will vary the amount
of lint
build-up.
To clean:
1. Lift off the agitator
barrel.
2. Wash or wipe the filter clean
in
the bottom of the agitator
barrel.
The filter is not removable.
3. Replace
the agitator
barrel and
snap into place.
IO
Advertisement
Table of Contents
