Table of Contents
Advertisement
For reference, Table 4 shows the pin assignments for the far end of the cables coming from the VHH10
unit.
Connector
Ethernet/PoE
RJ-45
Serial DB-9M
Table 3
Mounting the VHH10
The unit may be mounted either on a flat surface (such as a wall) or on a pole (refer to Fig. 3). The wall
mount bracket is included in the installation kit. Note that this bracket consists of two pieces: one piece
attaches to the VHH10 unit and the other piece gets mounted to the surface of the wall.
IMPORTANT: You must ensure that the unit is mounted so that the edge with the antenna connections
facing UP, as shown in Fig. 3. Also make sure to orient the wall mounting bracket correctly, as shown in
the diagram.
Veea, Inc. Confidential & Proprietary
Twisted Pairs
Pin Assignments
Pin1, DA+, White/Orange
Pin2, DA-, Orange
Pin3, DB+, White/Green
Pin4, DB-, Blue
Pin5, DD+, White/Blue
Pin6, DD-, Green
Pin7, DC-, White/Brown
Pin8, DC+, Brown
Pin1, N/C
Pin2, RXD, Green
Pin3, TXD, Orange
Pin4, N/C
Pin5, GND, Brown
Pin6, N/C
Pin7, RTS, White/Orange
Pin8, CTS, White/Green
Pin9, N/C
4
Advertisement
Table of Contents
