Subscribe to Our Youtube Channel
Related Manuals for CODEX DNA BioXp 3200 system
Summary of Contents for CODEX DNA BioXp 3200 system
- Page 1 BioXp™ 3200 system Remote installation and sign-off Page 1 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
-
Page 2: Pre-Installation Checklist
Please coordinate this install with your Codex DNA field application specialist. Your field application specialist can help you through any areas of this procedure where you have questions or require additional help. CAUTION: Read the entire installation guide before unpacking the BioXp™ system. Adhere to all safety warnings in Safety information and contact contact Codex DNA help@codexdna.com customer service at 858.228.4115 or... -
Page 3: Recommended Separation Distances
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects, and people. Page 3 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved. -
Page 4: Safety Precautions
Avoid dusty areas. Avoid areas where the instrument would sit in direct sunlight or near a heat source. Page 4 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved. - Page 5 4. Making certain the path is clear, carry the instrument and place it on the site prepared according to the requirements outlined in System site preparation. Page 5 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
- Page 6 Connect the instrument to a grounded power outlet. Note: We recommend connecting the instrument to a 1500 VA/900 W uninterruptible power supply. Page 6 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
- Page 7 ◦ Avoid areas where the instrument would sit in direct sunlight or near a heat source ◦ Avoid areas where accidental reagent spillage could seep into or onto the instrument Page 7 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
- Page 8 10. Remove the two white covers for the chillers from the accessory box and place them in the storage locations (see figure 2). Page 8 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
- Page 9 18. The system is now ready to operate. and to the Codex DNA server. If the globe is grayed out, please check that internet connection requirements are met. If the issue persists, contact Codex DNA customer service at help@codexdna.com.
- Page 10 Figure 5: Correct placement of the DEMO components after the run ‚ Cover, output chiller from storage location to output plate and back Page 10 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
- Page 11 10. After the deck inspection, press Start Now or Delay Start (no more than 2 hours) to begin the run. The run will take approximately 13 hours. Page 11 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
- Page 12 E4: 1416 bp control F4: 1416 bp control G4: 1416 bp control H4: 1416 bp control Figure 6. 45PC product output map Page 12 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
- Page 13 Verify the intensity of the bands on the gel is similar to the above image. All lanes verified Initials: __________ Page 13 of 14 Part number 43028 Version 1.0 Effective 31JUL2020 © 2020 Codex DNA, Inc. All rights reserved.
-
Page 14: Customer Acceptance
This is to confirm that the BioXp™ 3200 system installation has been completed and that all the items on this acceptance form have been achieved and demonstrated. By signing this form, the customer accepts title or responsibility of this instrument and gives Codex DNA, Inc. the approval to invoice the customer via the agreed upon terms of sale or placement.
Need help?
Do you have a question about the BioXp 3200 system and is the answer not in the manual?
Questions and answers