How To Perform A Measurement - Lanaform TS1 Manual

HOW TO PERFORM A MEASUREMENT?

EN
1. Press the Start/Stop button.
- All of the display symbols are visible for around 1
second. This is the initial LCD test.
- When the monitor has completed the preparations
necessary prior to measurement, the last reading is
displayed.
- The monitor will start to measure your blood
pressure; the inflating symbol will be displayed
during this inflation phase. During deflation, the
inflating symbol will be disabled and the deflating
symbol will be enabled (arrow diagram).
2. Display of the results of the measurement.
- When the measurement is completed, your blood
pressure and heart rate will be automatically
displayed on the LCD display.
- Depending on the result of the measurement, your
blood pressure level will be displayed on the right
side of the monitor, in compliance with the WHO
(World Health Organization).
mmHg
Diastolic
90
Blood
Pressure
85
*mmHg is a unit of measurement of pressure, called a "millimetre of mercury"
that allows for quantifying blood pressure.
3. Memory recall
- This monitor can conserve a maximum of 60 saved readings. To enable the
memory, simply first press the "M" button. The LCD screen will then display the
8 Version 01 of 04/10/2010
Increased Blood pressure Type
Border Line Type
Normal Blood
Pressure Type
130
mmHg
140