Supply Connections - Kohler K-13670 Installation Manual

Faucet
Shank
Supply
Hose
Control Unit
Outlet
Single Supply

6. Supply Connections

Allow enough space for penetration of supply tubes into the
supply stops. Cut the supply tubes if necessary.
Flush any debris from the supply line before connecting to the
faucet.
If the water in your area contains high levels of particulates,
install a 20 micron water filter in the supply line.
Connect the water supply to the control unit.
Insert seal washers in each end of the supply hose.
Connect the supply hose to the faucet shank and the control unit
outlet.
1031173-2-B
Faucet Lead Wire
Supply
Electrical Tubing
Control Unit
Double Supply
8
Thermostatic
Mixing Valve
Supply
Kohler Co.