Fittings Options; Power Supplies; Product Drawings; Product Specifications - Celerity UNIT 122 Series User Manual

3.8

Fittings Options

The fittings available for these units are:
- Swagelok , VCR
®
- C-seal and W-seal surface-mount
- Ultraseal, Buttweld and Specials
Not all fittings are available for all gases and ranges. Fitting options will vary according to the
MFC model.

4. POWER SUPPLIES

Celerity manufactures a series of analog and digital power supplies. These are capable of
monitoring and/or controlling from 1 to 5 mass flow controllers or meters simultaneously. Call
Celerity Customer Service for further information.

5. PRODUCT DRAWINGS

You can access and download a product drawing for any specific model of mass flow controller
(MFC) via www.celerity.net (http://www.celerity.net/html/products/technical_data/drawings).

6. PRODUCT SPECIFICATIONS

You can access and download the exact product specifications for any specific model, via
www.celerity.net (http://www.celerity.net/html/products/literature/literature.html)
6.1

MFC side can label

MFC side can labels carry a detailed listing of all information about a specific MFCs statistics
as built at the factory.
Figure 1. MFC Side Can Label with Explanations
©2005 Celerity, Inc. #199-001-0006 REV.F
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
, VCO
® ®
1. MFC Model Number
2. Nameplate Gas and Range
3. Customer Part Number
4. Serial Number
5. Calibration reference for traceability
6. N2 Calibration Reference
7. Response Speed-Exhaust Condition
(Atmosphere or Vacuum)
8. Operating Attitude
9. Valve Type (NC/NO)
Seal (and Seat) Material
10. Reference Temperature and Pressure
11. Electrical Connector Types
12. Options (Auto Shutoff/Auto Zero)
13. Customer Special Request Number
14. Main Firmware Revision
15. DeviceNet Firmware Revis
4/05
4