Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Alpha ESS EMS
- Page 1 Residential Product EMS Introduction Manual...
-
Page 2: Version Information
Your Smart Energy Version Information Version Date Content 21062019 ___________________________________________________________________ Alpha ESS Co., Ltd. Page 2 of 16... -
Page 3: Table Of Contents
5.2 Setting on AlphaCloud ................ 10 Aux Contact ....................11 6.1 Setting on AlphaCloud ................ 11 Backup Box ....................14 7.1 Load Management Function Setting on EMS LCD ......15 7.2 Load Management Function Setting on AlphaCloud ......16 ___________________________________________________________________ Alpha ESS Co., Ltd. -
Page 4: Self-Consumption Optimization
The typical electricity demand curve usually doesn’t meet the PV generation curve. By storing the surplus PV generation into battery storage unit, it can maximize PV generation and reduce electricity bill. ___________________________________________________________________ Alpha ESS Co., Ltd. Page 4 of 16... -
Page 5: Backup (Ups)
SMILE5 Users can also set UPS emergency priority or UPS emergency reserve to meet the needs of different families for stored electricity. Please set the UPS Reserve SOC on EMS LCD ___________________________________________________________________ Alpha ESS Co., Ltd. Page 5 of 16... -
Page 6: Load Shifting
Especially when the electricity tariff is different in one day, you can set battery grid charging time on EMS LCD, on AlphaCloud monitoring portal or through AlphaESS App. 3.1 Setting on EMS LCD 3.1.1... -
Page 7: Setting On Alphacloud
Your Smart Energy 3.2 Setting on AlphaCloud End user can set the grid charging time and battery discharging time on the portal or through AlphaESS App. ___________________________________________________________________ Alpha ESS Co., Ltd. Page 7 of 16... -
Page 8: Peak Shaving
The default PmeterOffset of the system is 0, that means the peak shaving function is off. If this function is on, EMS will adjust the PCS output power so that the total grid power will meet the set value. ___________________________________________________________________ Alpha ESS Co., Ltd. -
Page 9: Max Feed-In
In some countries there is regulation for PV feed-in rate or it must be zero export. After setting the PV capacity you can set this parameter on EMS LCD or on Alpha Cloud portal. Then the grid feed-in power from the PV generation will be limited. -
Page 10: Setting On Alphacloud
Your Smart Energy 5.2 Setting on AlphaCloud Installer can set the max feed-in rate on the other information interface of the “System Setup” page. ___________________________________________________________________ Alpha ESS Co., Ltd. Page 10 of 16... -
Page 11: Aux Contact
3. Click “enable” to set if the function for the chosen channel is available. 4. Click “Control Mode” to set the function mode, we have 3 modes for the AUX contact: On, Off and Auto. a. Control Mode On ___________________________________________________________________ Alpha ESS Co., Ltd. Page 11 of 16... - Page 12 When the feed-in power > left given value, the Aux contact will be switched on. When the feed-in power < right given value, the Aux contact will be switched off (or back to the initial situation). ___________________________________________________________________ Alpha ESS Co., Ltd. Page 12 of 16...
- Page 13 After the Aux contact being switched on, it will not be switched off before the given time passed. Pause After the Aux contact being switched off, it will not be switched on before the given time passed In this mode the normal self-consumption logic will be used. ___________________________________________________________________ Alpha ESS Co., Ltd. Page 13 of 16...
-
Page 14: Backup Box
No need change the distribution box wiring; Provide power to all loads in every phase in off-grid situation; Load management in Off grid situation, you can set parameters on EMS LCD, on AlphaCloud portal or through AlphaESS App. Use as Meter for DC/AC/Hybrid Coupling. (Meter function will be available... -
Page 15: Load Management Function Setting On Ems Lcd
7.1 Load Management Function Setting on EMS LCD Enter “Setting” page and select “Function”. Enter “Function” page and select “Backup Box”. Enter “Backup Box” page and replace “No” to “Yes”. Press “Enter” button on EMS to confirm. Press “↓” button and enter “Backup Box” setting page to set up Priority and the SOC to manage your loads. -
Page 16: Load Management Function Setting On Alphacloud
Your Smart Energy 7.2 Load Management Function Setting on AlphaCloud You can also set the load management parameters on the portal ___________________________________________________________________ Alpha ESS Co., Ltd. Page 16 of 16...