General Safety Regulations - Holmatro SP 52 Series Manual

EN
Pos. Type of mark
C
If the pictograms are illegible, have them replaced by a Holmatro Certified Technician.
2.3

General safety regulations

• Use this equipment solely for the activities for which it was designed. If you are in doubt or
uncertain, always consult your Holmatro dealer.
• Replace illegible safety symbols, pictograms and information labels with identical ones, available
from your Holmatro dealer.
• Varnished, plastic and rubber parts are not resistant to corrosive acid or liquid. Except for electrical
parts, rinse parts that have come into contact with corrosive acid or liquid with a lot of water. Consult
your Holmatro dealer for a resistance list.
• Prevent dirt in and on the couplers.
• Protect equipment against sparks during welding or grinding activities.
28
Description
WARNING
Wear safety goggles (or full face shield).
WARNING
Wear safety shoes with good ankle support and toe
protection.
NOTE
Read the user manual before use.
WARNING
Wear safety gloves.
WARNING
Wear safety clothing for the entire body with
reflective material.
WARNING
Wear a helmet.
916.001.563_000
Part no.
Please contact
Holmatro.
SP 52** (CL)