Changing The Control; Adjusting The Refrigerator Shelves - Roper RTIZDK Use And Care Manual

Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call us.
(See page
18.)
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
REASON:
Door opened often
Large amount of food added
Room temperature too warm
RECOMMENDED
CONTROL SElTlNGS:
Refrigerator
Freezer i
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Refrigerator 3
Freezer A
If Refrigerator
Section is
TOO COLD
Controls not set correctly
Refrigerator 2
for your conditions Freezer
B
If ICE isn't
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer i
Refrigerator 4
Freezer B
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator.
To remove a shelf:
1. Remove all items from the shelf.
2. Slide shelf straight out to the stop.
3. Lift the front.
4. Slide shelf out the rest of the way.
To replace a shelf:
1. Fit back of shelf on top of shelf guide with wire
stops on the bottom of the guide.
2. Lift front of shelf.
3. Slide shelf in until it clears all stops.
4. Lower front of shelf into place.
- .