Whirlpool RT14VK Using Manual page 18

Whirlpool use & care guide no-frost refrigerator-freezer rt14vk
Table of Contents

Advertisement

If You Need Assistance
Or Service
This section is designed to help you save the cost of a service call. Part 1 of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our toll-
free telephone
number for help or calling for service, please provide a detailed description of
the problem, your appliance's
complete model and serial numbers and the purchase date.
(See page 2.) This information will help us respond properly to your request.
1. Before
calling
for assistance
. . .
Performance problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. lt could save you the cost of a
service call.
PROBLEM
Your
refrigerator
will not
operate
Unfamiliar
sounds
or
a rattling/
jingling
noise
POSSIBLE
CAUSE
The power supply cord is not
plugged into a live circuit with
proper voltage.
A household fuse has blown
or circuit breaker tripped.
The Refrigerator Control is not
set correctly.
There is something on top of
or behind the refrigerator.
The sounds are normal.
SOLUTION
Firmly plug power cord into a live
circuit with proper voltage. (See
paw 5.1
Replace household fuse or reset
circuit breaker.
Set Refrigerator Control to a num-
bered setting. (See page 7.)
Remove item from on top of or behind
the refrigerator.
New features on your new refrigerator
make new sounds. (See "Understand-
ing the sounds you may hear" on
paw 12.1
There is
This is normal in hot, muggy
Make sure the refrigerator is level so
water in the
weather. The pan may even
the pan does not overflow.
defrost
pan
be half full.
The light
A household fuse has blown
Replace household fuse or reset
does not
or circuil breaker tripped.
circuit breaker.
work
The power supply cord is not
Firmly plug power cord into a live
plugged into a live circuit with
circuit with proper voltage. (See
proper voltage.
paw 5.1
The bulb is burned out.
Replace bulb. (See page 11.)
The optional
The freezer has not had
Allow the freezer time to get cold-this
ice maker
enough time to get cold.
could take overnight.
will not
operate
The signal arm is in the OFF
Push signal arm down to the ON
(up) position.
position. (See page 10.)
The water valve is turned off.
Turn the water valve on.
Water is not getting to the ice
Check the water line for clogs or
maker.
k?.akS.
18

Advertisement

Table of Contents
loading

Table of Contents