Removing The Crispers And Cover - Whirlpool RT14VK Using Manual

Adjusting the refrigerator shelves
Shelves can be adjusted to match the way
you use your refrigerator.
To remove
a
shelf:
1. Remove all items from the shelf.
2. Slide shelf straight out to the stop.
3. Lii the front.
4. Slide shelf out the rest of the way.
To replace a shelf:
1. Fit back of shelf on top of shelf guide with
wire stops on the bottom of the guide.
2. Lii front of shelf.
3. Slide shelf in until it clears all stops.
4. Lower front of shelf into place.
Removing the crispers and cover
To remove the crispers:
1. Slide crisper out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lii the front, then the back.
2. Lift cover up and out.
To replace the cover:
1. Ffi notches in back of cover into the nubs
at the rear of the refrigerator cabinet.
2. Lower front into place.
II I-- II
IF
'. --
\ II
Lii the front,
Sllde
out to the ston.
lift the front and ali&
out the rest of the way.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cokl air starts a slow evaporation.
The longer cubes are stored, the smaller
they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.