Adjusting The Weights - Bartell Global Contec BULL Owner's Manual And Parts Book

OIPB – C15002
BULL FLOOR STRIPPER
OWNER'S MANUAL

ADJUSTING THE WEIGHTS

The two centre weights can be locked in three different positions. The locking bolt is situated on
the right-hand side outside the weight. The bolt must be pulled out before changing the
position.
Pos. 1: the weight is mostly on the rear traction wheels. The wheels will have increased traction
and drive is increased.
Pos. 2: The weight is in the middle position and creates an option to transport machine with a
crane.
Pos. 3: The weight is mostly on the tool. The tools will be less likely to jump up and slide on top
of the material trying to be removed.
Figure 2: Weight positioning
11