Kilsen KFP-CE4 Series Quick Operation Manual

KFP-CE4 Series Quick Operation Guide

If you hear the buzzer

Determine the cause of the buzzer
If the buzzer is sounding and the Fire Alarm LEDs are
flashing or steady, then it's a fire alarm.
WARNING: Depending on your fire alarm system
configuration, the buzzer may be your first indication of a
fire alarm.
If the buzzer is sounding and the Fault LED is flashing,
then it's a fault.
P/N 501-415503-5-20 • REV 2.0 • ISS 08SEP11
FIRE ALARM
FAULT

For a fire alarm

1. Determine the location of the fire

Check the location of the fire, indicated by the Zone
LEDs.
If Fire Alarm and Zone LEDs are flashing, the fire alarm
has been activated by a detector. If they are steady, the
fire alarm has been activated by a manual call point.

2. Verify the fire alarm

If necessary, investigate the location of the fire alarm to
confirm that the alarm is genuine.
Depending on the configuration of your fire and
evacuation alarm system, you may have up to ten
minutes to investigate the alarm before fire brigade
notification devices are activated.

3. Leave the building

Once the fire alarm has been confirmed, leave the
building and follow your company's evacuation drill.
1