CONTENTS What’s in the Box Camera Overview Installation Formatting the MicroSD Card Setting Play Videos on Comouter Specifications Precautions Troubleshooting Contact Us...
Quick Start Guide 1. Insert the microSD card into the mirror dash cam. Warm Tips: MicroSD Card U3 or above is Highly Recommended for DL12 mirror dash cam CAMERA OVERVIEW (Micro SD card is not included). Please format the card in the camera before using this mirror dash cam.
Page 4
5. Connect the GPS module to the dash cam, and attach it on the A-Pillar. Position 2: Install the rear camera nearby the license plate. Position 2 is highly 6. Adjust the view angle of the front camera to get a good view. recommended.
FORMATTING THE MICROSD CARD The microSD card needs to get formatted on computer firstly and then get formatted on the camera, to ensure the compatibility with the camera. Notice This dash cam supports microSD card, up to 128GB with class 10 & above. Format SD at once? ①...
Page 6
On the screen, slide from right to left to switch the view mode, among front view only, On the left side of screen, slide up or down to adjust the view angle. back view only, and both front and back views. Note: If you choose the view mode that displays the both views of front and rear cameras, the view angle adjustment feature is to be disabled.
Page 7
Settings. 00:00:54 2020-01-03 03:33:16 PM 00:00:54 2020-01-03 03:33:16 PM Back 3. Lock The Current Video When DL12 begins to work, click the icon ” ” to lock the current video. The video is Video Encode Frequency Mirror Image Back Resolution...
G-Sensor: Off / Low / Meddle / High for optional, default is Low. Stream Media: on / off for optional, default is on. G-Sensor means any collision will activate the camera to record, and the videos will be When starts recording, the camera will be comprehensive monitoring both the front and locked which will never be covered by new files.
Note: The camera doesn’t record automatically after turning on. MicroSD Card U3 or above is Highly Recommended for DL12 mirror dash cam (MicroSD Check whether the memory card is full or reformat the card, if this problem exists, card is not included).
Need help?
Do you have a question about the DL12 and is the answer not in the manual?
Questions and answers