Tuff stuff TRAILHEAD Manual page 9

3. Zip the travel cover to the base along the other three edges, taking care that the tent fabric
does not become caught in the zipper. Secure the two long Velcro straps over the top of the
travel cover.
Final Step Attachment to The Roof Rack
1. This will take 2-3 people
2. Place the tent on top of your vehicle rack system, ensuring the mounting tracks are
perpendicular to the bars they will mount to, and the tent is centered on the roof rack.
3. Position the hinge so that the tent will open to the desired side.
4. Slide the 8mm bolts and channel sliders into the mounting tracks. Lift one side of the tent to
position one set of bolts and channel sliders on the inner side of the roof rack bar and an
additional set on the opposite side. Repeat on all four corners.
3. At each of the four corners where the rack bars and mounting tracks cross, using a steel mounting plate
and nylock nuts to secure the bolts on either side of the bar. Tighten all eight (8) bolts securely with the
included nuts and wrench. Check all the mounting bolts and brackets before you leave for camping.