Tuff stuff TRAILHEAD Manual page 8

INSTRUCTION 7 PICTURE
4. Attach the brackets to the ladder by threading the 40 mm Steel M6 bolt through a steel washer,
the lateral side of the ladder bracket, the rubber washer, and the hole in the ladder, followed by a
nylock nut.
1. To attach the travel cover, slide the rounded fabric end of the cover into the rounded C-channel at the
hinge side of the tent base. Make sure the cover is oriented, so the exterior side of the cover faces up when
you pull the cover over the tent
2. Fasten the Velcro straps on either side of the tent to hold the canopy in place
Driving Cover Attachment