TyloHelo Vita Installation Instructions Manual

Vita Sauna Kit
Please immediately check for any hidden damage that may have occurred in ship-
ping. If any damage is found you must notify the delivering carrier within seven days.
A few minutes with the following instructions will ensure quick and proper assembly,
and many years of enjoyment and relaxation. By reviewing all the instruction steps
ahead of time, you will have a better feel for the whole process.
Your sauna package will arrive on a stretch-wrapped pallet including a stack of pre-
built panels, benches, and boxes with the heater and accessories.
71-0155 Vita Room Instatllation Manual
Rev. 01
installation instructions
Drilling, sawing, sanding or machining cedar wood products
can expose you to wood dust, a substance known to the State
of California to cause cancer. Avoid inhaling wood dust or
use a dust mask or other safeguards for personal protection.
For more information go to www.P65Warnings.ca.gov/wood.
Doc # 71-0147
Page 1
Tools Required
•Hammer or pin nailer
•Handsaw and mitre box (for molding installation)
•Drill or cordless screwdriver
•Tape measure
•Square
•Level
•3/8" wood bit (if sauna room has an L-bench)
•Note: Torx bit is provided
Warning
08 July 2020