Doosan L6-60HZ-T4F Operation And Maintenance Manual page 44

NOTE: You must be careful not to put too much primer on at one time, this
will effect the amount of texture that you are trying to achieve. Allow the
texture coat to flash for 20 minutes or until dry to touch.
10. Apply any Dupont Topcoat Finish, such as, Imron TM or Centari TM according
to the label instructions.
NOTE: To re-top coat the textured surfaces when sheet metal repairs are
not necessary, follow steps 1, 2, 4, 5, 6. 8 and 10.
46