Nicol Scales & Measurement BPP1000 Series Installation Manual
  1. Manuals
  2. Brands
  3. Nicol Scales & Measurement Manuals
  4. Scales
  5. BPP1000 Series
  6. Installation manual

Nicol Scales & Measurement BPP1000 Series Installation Manual

Portable platform scale
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Presented By
Dallas
Ft Worth
Austin
Houston
NicolScales.com
800.225.8181
Contact Us
Nicol Scales & Measurement is an ISO Accredited Calibration
Company that has provided calibration, repair and sales of all types
of weighing and measurement products since 1931.

Advertisement

Table of Contents
loading

Related Manuals for Nicol Scales & Measurement BPP1000 Series

Summary of Contents for Nicol Scales & Measurement BPP1000 Series

  • Page 1 Presented By Dallas Ft Worth Austin Houston NicolScales.com 800.225.8181 Contact Us Nicol Scales & Measurement is an ISO Accredited Calibration Company that has provided calibration, repair and sales of all types of weighing and measurement products since 1931.
  • Page 2 Installation Manual Portable Platform Scale BPP1000 Series BPP2000 Series © 1990-2015 by Fairbanks Scales, Inc. 50699 All rights reserved Revision 5 08/2015...
  • Page 3 Disclaimer Every effort has been made to provide complete and accurate information in this manual. However, although this manual may include a specifically identified warranty notice for the product, Fairbanks Scale Inc. makes no representations or warranties with respect to the contents of this manual, and reserves the right to make changes to this manual without notice when and as improvements are made.
  • Page 4 Amendment Record Portable Platform Scale BPP1000 Series BPP2000 Series Document 50699 Manufactured by Fairbanks Scales Inc. 821 Locust St. Kansas City, MO 64106 Created 08/1990 Revision 1 8/1990 Released Manual Updates made to include BPP2000; Revision 2 11/2006 Revisions in text formatting, illustration updates,...

  • Page 6: Table Of Contents

    Table of Contents SECTION 1: INTRODUCTION ........9 Scope of This Manual .
  • Page 7 08/2015 Rev. 5 50699...

  • Page 8: Scope Of This Manual

    Section 1: General Information Scope of This Manual Portable Platform Scale Models This manual provides instructions for the BPP1000 BPP2000 • Please read this manual carefully before assembling. • Untrained personnel should not attempt to make any adjustments not specified in these instructions.

  • Page 9: Description

    Section 1: General Information Description Portable Platform Scale is a compact portable unit designed for light to medium operation. It requires no external power connections and will operate in a wide variety of environmental conditions. Specifications Specifications BPP 1000 BP 2000 Capacity 1000 lbs.
  • Page 10 Section 1: General Information 08/2015 Rev. 5 50699...

  • Page 11: Section 2: Installation

    Section 2: Installation Unpacking • Check the packing materials for loose parts or hardware before disposal. • Check that all parts are included using the packing list. • Check for component damage that may have occurred during shipping • The scale platform under-structure arrives fully assembled, with the levers in their proper positions.

  • Page 12: Base Assembly

    Section 2: Installation Base Assembly NOTE: The following descriptions refer to “Key#” (#4, etc.) to describe parts. Use the parts list and Key# in the list to identify all such parts. Platform Sub Assembly 1. Place the on the floor upside-down, preferably on 2x4 blocks to raise it up off the floor, if possible.
  • Page 13 Section 2: Installation Base Assembly, Continued 5. Insert a cotter pin ( ) through the Axle Rod. • Using needle nose pliers, bend back both haves of the cotter pin to secure the wheel assembly. 6. Repeat steps two through four (2-4) for the second axle.

  • Page 14: Pillar And Beam Assembly

    Section 2: Installation Pillar and Beam Assembly 1. Thread the two (2) Pillar Support Rods ( ) into the tapped holes provided in the base. • The end with the longer thread should fit into the platform (about 1⁄2 inch). 2.
  • Page 15 Section 2: Installation Pillar and Beam Assembly, Continued 5. Place the cast iron Beam Support ( ) over the Steelyard Rod with the hook facing to the right (when facing the scale platform). 6. Insert the Beam Cap ( ) onto the pillar rods. •...

  • Page 16: Zeroing The Beam

    Section 2: Installation Zeroing the Beam Note: Check that the weighing platform "floats" on the levers' pivots and bearings and does not bind or set to one side. The platform should return to a centered position if moved to any position then released. 1.

  • Page 17: Troubleshooting

    Section 2: Installation Troubleshooting If the beam will not balance using the balance ball, check the following: • Is the poise is at (zero) and is the poise screw is snug? • Is the platform free and “floating”? • Is the beam load rod connected properly on both ends? •...

  • Page 18: Section 3: Parts

    Parts List BPP2000 BPP1000 Key # Description Part # Part # 55017 BPP1000 Series, 24" x 21", 1K x .5, Portable Beam 55789* BPP2000 Series, 24" x 31", 2K x 1, Portable Beam 71622 78796* Set of Pillar Rods 58933 77228*...
  • Page 19 Section 3: Parts Parts List, Continued BPP1000 BPP2000 Key # Part # Part # Description 36, 37, 38 71594 Loop Assembly Cotter Pin Bearing 95839 77229* Support Beam 71591 Loop 40, 41, 42 71595 Loop Assembly Cotter Pin Bearing 95840 Lock Assembly, Beam 71592 Acorn Nut (2)

  • Page 20: Parts Diagram

    Parts Diagram 08/2015 Rev. 5 50699...
  • Page 21 08/2015 Rev. 5 50699...
  • Page 22 Portable Platform Scale Models BPP1000 & BPP2000 Document 50699 Manufactured by Fairbanks Scales, Inc 821 Locust Street Kansas City, MO 64106 www.fairbanks.com...

This manual is also suitable for:

Bpp2000 series

Table of Contents