Samsung HW-N300 Full Manual page 17

Disconnecting the Soundbar from the TV
Press the button on the right side panel or on the remote control and switch to any mode but
"Bluetooth".
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
• To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold
button for 5 seconds in "Bluetooth" mode. TV Connect is turned OFF.
• To turn TV Connect back on, press and hold the
"Bluetooth" mode.
• TV Connect is set to ON by default.
Mode
TV Connect-OFF
TV Connect-ON
NOTES
– If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
– In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
– The Soundbar automatically turns off after 5 minutes in the Ready state.
– The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
– Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
– The Soundbar supports SBC data (44.1kHz, 48kHz).
– Connect only to a Bluetooth device that supports the A2DP (AV) function.
– You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)
function.
Remote control Button
5 Sec
5 Sec
ENG - 17
button for 5 seconds with the Soundbar in
Blinking
B
Blinking
B
LED indicator
W W R
W W G